Social Change In Mind Production

Problems sometimes arise when a restore iphone

Restore incomplete

This happens because the firmware installation process is not perfect, it is usually the restore process stops in the middle of the road, and the iphone can not connect to iTunes or to your PC since the iPhone does not have the firmware installed in it.

Cause

Firmware file is corrupt, not perfect when you download the firmware file.
Firmware files are not compatible with your iphone.
Connections are not good between iPhone and PC / notebook (usually occurs because the data cable is not ori, or the USB port is loose so disconnected occurred between iPhone and PC / notebook at the time of the restore process is running.
lights off.

Solutions and handling

Download file that is compatible and make sure you do not corrupt the firmware file (firmware file with the extension. Ipsw + / - 200MB.

Make sure that your iPhone is connected properly and use the data cable of the original apple.

Never played his iphone during the restore process runs (fear can interfere with the smoothness of the restore process).

To avoid a restore failure due to electrical currents to die, it is recommended to use the notebook.

execution

into DFU or Recovery Mode.
wait until connected with iTunes and run the restore process by pressing the Shift keyon the keyboard and click restore.

How to Jailbreak iPhone (SU & FU)

To Jailbreak, the most simple way is to use Blackra1n. Some things to watch when they want to JailBreak using Blackra1n :

download an application from www.blackra1n.com >> select windows if you are using windows, and select if you are using a mac apple.
When finished downloading, before running the application Blackra1n, make sure your iPhone is connected to a PC / Notebook via data cable.
Make sure that your iphone can connect to the Internet network (simcard you already support for Internet network that can Blackra1n loading Cydia to download applications, Rock, and Blacksnow).
Run Blackra1n on PC / notebook>> Click "make it Ra1n", then Blackra1n will begin his duties, wait until your iphone reboot and perform image blackrain on the iPhone screen.
After Blackra1n display options that must be installed, select all (app. Cydia, Rock & Blacksnow) if your iphone SU, or select the app. Cydia & Rock FU alone if your iphone.
Wait until the process of Blackra1n intalasi done, make sure the app. Cydia & Rock you installed are running smoothly.
The last uninstall blackra1n (black icon), and iphone you are ready to use.

Iphone stuck on apple logo and not recognized by itunes

Hard Reset :

Power on the iPhone.
Hold down the Home and Power for about 7 seconds, or until the screen turns black.
You must reboot your iPhone. If not, do not worry. Hold again about 2 seconds.

Forced Restore :

Turn off your iPhone by pressing the Power button for about 5 seconds or until theSlide to Power Off slider appears.
Slide the Power Off slider. If the iPhone is unresponsive, follow the instructions Hard Reset to Step 3.
Open iTunes on your computer (Mac or PC).
Press and hold the Home button while you connect iPhone to your computer via a USB cable.
iTunes should prompt you with a message saying the iPhone has been detected in Recovery Mode and that you must restore before it can be used with iTunes.
Click Ok.
Click the Confirm Restore that you want to Restore and Update.
Restore has been started. Leave your iPhone connected to reboot your iPhone andsync with iTunes.

Iphone Error Collection With Solution

Errors -9815

Set exact date, restart computer. See also Apple's KB article.

Errors -9814

Set exact date, restart computer. See also Apple's KB article.

Errors -9800

Set exact date, restart computer. See also Apple's KB article.

Error -50

Delete Storm Vedio, QuickTime, iTunes, then reinstall iTunes. See also Apple's KB article.

Error -35

See Apple's KB article.

Error 1

Unable to downgrade. Try changing the USB port (the back one of chassis is better) and restart computer.

The installed version of iTunes may also be too old. Update iTunes.

Error 2

Sn0wbreeze 1.6 Custom Firmware has a ASR patch problem. Use sn0wbreeze 1.7 or PwnageTool. Device isn't bootable.

Error 6

Not enter the downgrading mode, change USB port (the back one of chassis is better) and restart computer.

Error 9

Searching correct fault.

Error 10

LLB is missing from the IPSW. The device cannot be booted up. The trick to skip the baseband update no longer works.

Error 11

Removed bbfw file in the firmware folder of an unzipped IPSW.

Error 13

Occurs when you want to install a beta firmware with iTunes for Windows (actively blocked by Apple; beta users are developers and therefore must have a Mac).

Error 13 may also signify a USB problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.

Error 14

Custom firmware update fail (PwnageTool). You have to restore the device with a custom firmware. Update to a custom firmware isn't working. Device isn't bootable.

USB Problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.

Error 17

Custom firmware update fail (sn0wbreeze). You have to restore the device with a custom firmware. Update to a custom firmware isn't working. 2

Error 20

Searching correct fault.

Error 23

Baseband Communication error (Hardware), Most probably Baseband chip is faulty.

Error 26

False version of the NOR flash firmware. Use the correct sn0wbreeze version.

Error 29

See Apple discussions thread about this problem.

Error 37

iPod touch 2G LLB patched with the 0x24000 Segment Overflow was used on an iPhone 3GS custom firmware. Known on damaged bundles from unofficial PwnageTool distributions or bundles.

Error 1002

Are you restoring to a stock apple firmware or a custom pwn firmware? Either way make sure you are in DFU mode first.

Error 1004

This is caused by a failure to match the Baseband Nonce currently in memory to the Nonce returned in the BasebandFirmware SHSH blob. This is a normal part of iPhone 4 local restores via TinyUmbrella. 1

Error 1013

Restart computer; change computer; reinstall system, if iPhone is always in restoring mode: XP users can jump from restoring mode with ibus; MAC users can use iNdependence. (usually on the iPhone with 1.0.2 firmware downgraded from 1.1.1)

Error 1014

This error is down to itunes not liking your USB ports on your computer. Use a different USB slot or a different computer if possible. That is the easiest fix!

Error 1015

Error 1413

Restart computer; change USB port; reinstall system. See also Apple's KB article.

Error 1415

Restart computer; change USB port; reinstall system.

Error 1417

Restart computer; change USB port; reinstall system.

Error 1418

Restart computer; change USB port; reinstall system.

Error 1428

Restart computer; change USB port; reinstall system.

Error 1600

Custom firmware can't be restored on a device with DFU Mode. Use Recovery Mode.

Error 1602

Restart computer; change computer; reinstall system.

Error 1603

False kernelcache patch. Known on damaged bundles from unofficial PwnageTool distributions or bundles. See also Apple KB article .

Error 1604

Device was not pwned (signature checks were not blocked). Custom firmware can't be restored.

Error 1611

iTunes tried to enter the Restore Mode, but the device turned back to the Recovery Mode.

Error 1619

iTunes is too old and couldn't read the iPhone in Recovery or DFU Mode. Please update iTunes and try it again.

Error 1644

IPSW was moved during prepare with iTunes. Try it again and don't move the IPSW.

Error 2002

iTunes can't connect because another program is using it or it's disconnected during the Apple Server check.

Error 3XXX

iTunes can't connect to gs.apple.com. Maybe Port 80 and Port 443 is blocked. Open it on your router.

Error 3002

Update to an older firmware isn't working, because Apple is no longer handing out SHSHs for the device/firmware combination.

Error 3004

No internet connection during the firmware restore.

Error 3014

False edited hosts. The SHSH request couldn't be completed. No connection to the Apple Server, Sauriks Server or localhost.

Error 3194

Occurs when trying to install an old firmware and Apple's server disallows the installation. The only solution is to have SHSH backup and modify the hosts file to point to Saurik's Cydia server where they are backed up (or localhost if you have it yourself).

Error 3195

"An internal error occurred." Missing SHSH for the firmware. Maybe the same as "This device isn't eligible for the request build." but with an cache error.

Error 11222

internet options Connections tab Click LAN Settings uncheck "use a proxy server"

0xE8000022

Searching..........

0xE800003D

False permissions in the Carrier Bundle folder. Restore, update or fix the permissions from the carrier bundle to update the carrier settings via iTunes.

0xE800006B

Device was suddenly unplugged. iTunes couldn't connect with the device. Try it again.

0xE8000065

sn0wbreeze custom cirmware error on USB connection. Unplug the device, reboot it, and plug it in again.

conclusion :

Error 1011, 1013, 1015 when the restore is complete :

means that the modem firmware could not be updated, if this error occurs when you're downgrade the device (eg: 1.1.4 to 1.1.3), this is normal. You need a program like Independence (on Macintosh) or Jailbreak 1.1.2 (on windows) to boot the device Agan of recovery mode, as well as complete the downgrade process. if the device agan words "need repair", and you restore, but it still appears the same error, there is the possibility of permanent damage in your device. try to use DFU restore, and hope for the best.

Error 1602, 1603 :

This is the sort of error with no known cause. but it is usually caused by the loss of your connection to the Device iTunes. usually Reboot or restart your device apple can resolve this problem. there are times where you need to reinstall iTunes, or where in some serious cases, it took the help of Apple support. You might get lucky when a restore without entering the SIM card. (off the SIM card, reboot the device into restore mode, then try the restore again.)

Error 1600 on OSX :

check apple support.

Error 1, 2, 3, 6, or the error number below 99 :

your device can not be used as restore mode.try to DFU mode, restore and try again.
try >> mkdir ~ / Library / iTunes / "Device Support"if that directory already exists, try deleting all the files in it.

Error 1604 :

Chek apple support.

Error 1, 2, 3, 6, or the error number below 99 :

your device can not be used as restore mode.
try to DFU mode, restore and try again.

Error 9 ,23 :

iphone on the circumstances can not be restored, itunes unknown error 23.

forced to use "run blackra1n" let his load into OS X.

after the iphone on, but iTunes can not be read, the contents of the iphone. The nextstep is to "erase all content and settings", located in settings> general> reset> eraseall content and settings (not needed approximately 2 hours).

after that restore iphonenya will return.

good luck!

Social Change In Mind Production

Labels

All Solution Iphone Problem Error On Itunes

Friends Blog